LW series horizontal drilling fluid unloading sedimentation Centrifuge spiral (Decanting Centrifuge) is aimed at the characteristics of oil drilling fluid, the design of solid-liquid separation special equipment, can run at full speed to finish feeding, centrifugal sedimentation, unloading, each procedure, mainly for the recycling barite, remove fine solid, reduce the drilling fluid solid content, drilling fluid control the density, viscosity, guarantee the performance of the drilling fluid and rapid drilling are of great role. Drilling horizontal spiral unloading settlement centrifuge is using the principle of centrifugal sedimentation drilling suspending liquid separation, suspending liquid feeding tube by the spiral feeder push in liquid into a hole drum, centrifugal force in under the action of solid phased particles is pulled to drum wall, through the spiral feeder push on the blade pushed to drum slag discharge from the small mouth, liquid, through the drum the overflow of the main hole overflow. Such a continuous cycle, in order to achieve the purpose of continuous separation. Settlement type centrifuge belong to horizontal spiral centrifuge category, the full name horizontal type spiral sedimentation centrifuge. Xian TianRui solid control the production of horizontal type settlement drilling fluid centrifuge widely used in petroleum drilling industry. The advantages of decanting centrifuge 1.horizontal spiral unloading settlement centrifuge the effect except sand is good. With many years development and production of centrifuge experience, and after a lot of field test, LWF series of centrifuges subduction zone parameters and way of feeding the optimization design, make the centrifuge except sand effect increases greatly, and have same specification With import centrifuge 2. horizontal spiral unloading centrifuge consum low energy, work load are light. And productivity double than the original, power does not increase, and work with centrifuge, motor load no more than 80% of the rated power. 3. hor |